Tin Plate & Pre-Painted Steel Banner Poles & Banner Rails
Our tin plate and prepainted steel banner poles and banner rails, Shelf Tubes and Shelf Tubing, are ¾”, 1/2″, 1″ and 1.5″ OD round and made in sets of 2 or 3 pieces.
Other custom diameter sizes can be made with tooling. Banner pole and rail length is typically 2ft and 3ft but other length demands can be accommodated. The standard thickness is 0.0141″ or less on 3/4″, 1/2″ and 1″ and .018 on 1.5″. For both standard and custom banner poles and rails, special end inline fabrication during production e.g., special fit for eagles, is available. We can also make a tube that will fit in another tube and either fall out when lifted or not fall out depending. Inline fabricating such as perforating and economical thin wall are available. We can make tin plate banner poles and banner rails in any length. Our banner rails are strong and will not break under physical strains such as bending or twisting. We can also add strippable PVC protection to protect decorative finishes.
Our tin plate banner poles and banner rails are ¾” OD round and made in sets of 2 or 3 pieces. Other custom diameter sizes can be made with tooling. Banner pole and rail length is typically 2ft and 3ft but other length demands can be accommodated. The standard thickness is 0.0141″ or less. For both standard and custom banner poles and rails, special end inline fabrication during production e.g., special fit for eagles, is available. We can also make a tube that will fit in another tube and either fall out when lifted or not fall out depending on the customer’s need.
To see more of our products please browse our product catalog.